Can I configure NetcamViewer Monitor with a fixed IP address?

That is possible, you can do this by following these steps:

  1. From the menu on the left choose the option ''settings''.
  2. At the bottom of the page, under the heading ''System'', you will find the manual IP settings.
  3. When you activate this you will find the following options where you can manually configure the IP-settings:

The default configuration for NetcamViewer Monitor is to receive its IP settings via DHCP.
You can always find the IP address and the host name where you can reach the unit on the monitor screen when no camera is being displayed.

If you prefer to give NetcamViewer Monitor a fixed IP address then you can enable this and enter the appropriate details and then click okay.

on Thursday January 26 by Super User
Was this helpful?