Configuration

  1. You press the '+'-sign in the camera list.
  2. Add the name you wish to use for the camera.
  3. Add the ip-address or the hostname of the camera, without http://. This is already mentioned.
  4. In case you normally need to add a port number, you can change port 80 into another port number. If not, you can leave it.
  5. Add the user name and password of the camera. Both are case-sensitive.
  6. Select the camera brand.
  7. Depending on the camera type you can sometimes select extra options for the camera settings.
  8. Now select the top-right button 'Ready' and the camera list shall reappear.
  9. Press the camera’s name to view the live images.
on Thursday January 26 by Super User
Was this helpful?

You can delete a camera, multiview or folder from NetcamViewer Mobile the same way you normally delete an e-mail or other information from your iPhone. This is done using "Swipe". In order to delete a camera, follow these directions:

  1. Move your finger right to left on the camera you wish to delete. You will see a “Delete” button appear on the right side.
  2. To delete the camera you then press the "Delete"-button.

netcamviewer delete

on Thursday January 26 by Super User
Was this helpful?